Uit Hack42
Ga naar: navigatie, zoeken
k
k (Tekst vervangen - 'Rubriek=Het Museum' door 'Rubriek=Opslag')
 
(12 tussenliggende versies door dezelfde gebruiker niet weergegeven)
Regel 1: Regel 1:
 
{{Hardware
 
{{Hardware
−
|Rubriek=Het Museum
+
|Rubriek=Opslag
 
|Type=Server
 
|Type=Server
 
|Manufacturer=Digital
 
|Manufacturer=Digital
Regel 6: Regel 6:
 
|Name=Digital MicroVAX 4000/200
 
|Name=Digital MicroVAX 4000/200
 
|Serial=AY01400450
 
|Serial=AY01400450
−
|Owner=Hack42
+
|Owner=Museum
−
|Status=Corrupt
+
|Status=Werkt
 
|Location=Depot
 
|Location=Depot
 
|Herkomst=DND
 
|Herkomst=DND
 +
|OpnameCollectie=9 aug 2014
 
|Architecture=VAX
 
|Architecture=VAX
−
|Systembus=Qbus
+
|Systembus=QBus
 +
|OS=VMS
 +
|OS_Version=5.4-3
 +
|Hostname=UTCIV1
 +
|MAC=08-00-2B-17-25-4B
 
}}
 
}}
−
DND. 2x selftest failure
+
CPU KA640-A
 +
 
 +
MEM 52MB
 +
 
 +
DISK RF72
 +
 
 +
TAPE TK70
 +
 
 +
<br style="clear: right">
 +
<pre>
 +
KA640-A V5.3, VMB 2.7
 +
Performing normal system tests.
 +
41..40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..
 +
25..24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..
 +
09..08..07..06..05..04..03..
 +
Tests completed.
 +
>>>sho mem
 +
Memory 0: 00000000 to 003FFFFF, 4MB, 0 bad pages
 +
Memory 1: 00400000 to 013FFFFF, 16MB, 0 bad pages
 +
Memory 2: 01400000 to 023FFFFF, 16MB, 0 bad pages
 +
Memory 3: 02400000 to 033FFFFF, 16MB, 0 bad pages
 +
 
 +
Total of 52MB, 0 bad pages, 122 reserved pages
 +
>>>sho dev
 +
DSSI Node 0 (DISK0)
 +
-DIA0 (RF72)
 +
 
 +
DSSI Node 7 (*)
 +
 
 +
UQSSP Tape Controller 0 (774500)
 +
-MUA0 (TK70)
 +
 
 +
Ethernet Adapter
 +
-ESA0 (08-00-2B-17-25-4B)
 +
>>>sho ver
 +
KA640-A V5.3, VMB 2.7
 +
>>>b
 +
No default boot device has been specified.
 +
 
 +
Available devices.
 +
-DIA0 (RF72)
 +
-MUA0 (TK70)
 +
-ESA0 (08-00-2B-17-25-4B)
 +
 
 +
Device? [ESA0]: dia0
 +
 
 +
(BOOT/R5:0 DIA0)
 +
 
 +
 
 +
 
 +
  2..
 +
-DISK0$DIA0
 +
  1..0..
 +
 
 +
 
 +
  VAX/VMS Version V5.4-2  Major version id = 1 Minor version id = 0
 +
 
 +
PLEASE ENTER DATE AND TIME (DD-MMM-YYYY  HH:MM) 
 +
PLEASE ENTER DATE AND TIME (DD-MMM-YYYY  HH:MM)  17-AUG-2014 16:23
 +
$!  Copyright (c) 1990 Digital Equipment Corporation.  All rights reserved.
 +
 
 +
%STDRV-I-STARTUP, VMS startup begun at 17-AUG-2014 16:23:34.44
 +
%SET-I-NEWAUDSRV, identification of new audit server process is 00000089
 +
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:24:23.94  %%%%%%%%%%%
 +
Operator _UTCIV1$OPA0: has been enabled, username SYSTEM
 +
 
 +
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:24:24.00  %%%%%%%%%%%
 +
Operator status for operator _UTCIV1$OPA0:
 +
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, NETWORK, CLUSTER, LICENSE
 +
 
 +
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:24:25.13  %%%%%%%%%%%
 +
Logfile has been initialized by operator _UTCIV1$OPA0:
 +
Logfile is UTCIV1::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1183
 +
 
 +
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:24:25.14  %%%%%%%%%%%
 +
Operator status for operator UTCIV1::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1183
 +
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, NETWORK, CLUSTER, LICENSE
 +
 
 +
17-AUG-2014 16:24:27.11 Einde logical names. Begin QUEUE MANAGER.
 +
 
 +
17-AUG-2014 16:24:34.74 Einde QUEUE MANAGER.
 +
 
 +
17-AUG-2014 16:24:34.82 Einde ....... Begin CDD/Plus.
 +
 
 +
Rdb/VMS monitor (RDMS_MONITOR) started
 +
 
 +
17-AUG-2014 16:24:46.36 Einde CDD/Plus. Start PASCAL.
 +
 
 +
17-AUG-2014 16:24:48.90 Einde PASCAL. Begin FORTRAN
 +
 
 +
17-AUG-2014 16:24:49.54 Einde FORTRAN. Begin FMS
 +
 
 +
 
 +
17-AUG-2014 16:24:49.63 Einde FMS. Begin DTR
 +
 
 +
 
 +
17-AUG-2014 16:24:49.88 Einde FMS.
 +
17-AUG-2014 16:24:49.94 Begin DTR.
 +
 
 +
17-AUG-2014 16:24:52.32 Einde DTR. Begin COBOL.
 +
 
 +
 
 +
17-AUG-2014 16:24:53.02 Einde COBOL. Begin ACCOUNTING(1)
 +
 
 +
 
 +
 
 +
17-AUG-2014 16:24:54.36 Einde ACCOUNTING(1). Begin PLTSMB + SMBSRVSHR.
 +
17-AUG-2014 16:24:55.10 Begin CIVNETWERK.COM
 +
17-AUG-2014 16:26:37.58 Einde CIVNETWERK.COM, begin STARTNET.COM
 +
%RUN-S-PROC_ID, identification of created process is 0000008D
 +
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:26:41.51  %%%%%%%%%%%
 +
Message from user DECNET on UTCIV1
 +
DECnet starting
 +
 
 +
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:26:43.16  %%%%%%%%%%%
 +
Message from user DECNET on UTCIV1
 +
Error opening permanent proxy database
 +
 
 +
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSEXE>NETTRACE.EXE
 +
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSMSG>NETTRACE_MESSAGES.EXE
 +
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSLIB>NETTRACE$GAP_ANALYZE.EXE
 +
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSLIB>NETTRACE$GTW_ANALYZE.EXE
 +
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSLIB>NETTRACE$L2E_ANALYZE.EXE
 +
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSLIB>NETTRACE$L2_ANALYZE.EXE
 +
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSLIB>NETTRACE$L3_ANALYZE.EXE
 +
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSLIB>NETTRACE$L3_DDX76_ANALYZ
 +
E.EXE
 +
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSLIB>NETTRACE$X29_ANALYZE.EXE
 +
%LES-S-PROC_ID, identification of created process is 0000008E
 +
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:26:57.65  %%%%%%%%%%%
 +
Message from user SYSTEM on UTCIV1
 +
%LES-S-LESSTARTED, LES V2.0 loaded
 +
 
 +
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:26:57.66  %%%%%%%%%%%
 +
Message from user SYSTEM on UTCIV1
 +
%LES-S-ACPSTARTED, LES$ACP started running LES$ACP V1.0
 +
 
 +
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:27:02.49  %%%%%%%%%%%
 +
Message from user SYSTEM on UTCIV1
 +
%PSI-S-STARTED, VAX PSI V4.3 (Multi-host, Native), network device _NWA0: mounted
 +
 
 +
%PSI-S-STARTED, VAX PSI V4.3 (Multi-host, Native), network device _NWA0: mounted
 +
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:27:06.23  %%%%%%%%%%%
 +
Message from user SYSTEM on UTCIV1
 +
%PSI-S-STARTED, VAX PSI V4.3, network device _NVA0: mounted
 +
 
 +
%NCP-I-NOINFO, No information in database
 +
%NCP-W-UNRCMP, Unrecognized component , Line
 +
Line = ISA-0
 +
%SYSTEM-W-NOSUCHDEV, no such device available
 +
%NCP-W-UNRCMP, Unrecognized component , Line
 +
Line = DSV-0-1
 +
%SYSTEM-W-NOSUCHDEV, no such device available
 +
%NCP-W-OPEFAI, Operation failure , data check
 +
 
 +
%SYSTEM-F-FILNOTACC, file not accessed on channel
 +
%NCP-I-NOINFO, No information in database
 +
%PSIAUTH-I-RDBNOMODS, no modifications made to rights data base
 +
%NCP-W-UNRCMP, Unrecognized component , Circuit
 +
Circuit = ISA-0
 +
 
 +
%NCP-I-NOINFO, No information in database
 +
%RUN-S-PROC_ID, identification of created process is 0000008F
 +
17-AUG-2014 16:27:27.24 Einde STARTNET.COM, begin DSVCONFIG
 +
%NCP-W-UNRCMP, Unrecognized component , Circuit
 +
 
 +
 
 +
17-AUG-2014 16:28:25.99 Einde DSVCONFIG, begin LATPARM.COM
 +
17-AUG-2014 16:28:28.87 Einde LATPARM.COM, begin DEF_DTE_TABLE
 +
17-AUG-2014 16:28:30.03 Einde DEF_DTE_TABLE.COM, Einde RCNETWERK.COM
 +
17-AUG-2014 16:28:30.18 Einde DECnet, EARN,
 +
 
 +
%RUN-S-PROC_ID, identification of created process is 00000091
 +
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:28:32.86  %%%%%%%%%%%
 +
Message from user LATACP on UTCIV1
 +
LAT ACP initialized                                                                                                               
 +
 
 +
 
 +
        Begin LAT$SYSTARTUP.COM
 +
 
 +
 
 +
        Einde LAT$SYSTARTUP.COM
 +
 
 +
17-AUG-2014 16:28:44.04 Einde LAT
 +
 
 +
 
 +
17-AUG-2014 16:28:44.11 Einde TERMINAL netwerk. Begin UCX
 +
 
 +
%RUN-S-PROC_ID, identification of created process is 00000092
 +
The Internet driver and ACP were successfully loaded.
 +
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:28:52.30  %%%%%%%%%%%
 +
Message from user INTERnet on UTCIV1
 +
INTERnet Loaded
 +
 
 +
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:28:56.43  %%%%%%%%%%%
 +
Message from user INTERnet on UTCIV1
 +
INTERnet Started
 +
 
 +
%UCX-E-INVINTER, Error defining interface: ze0
 +
-UCX-I-ACPQIO, Failure on Internet ACP QIO
 +
-UCX-E-INVETHERNAM, Too many protocols or protocol already assigned
 +
-SYSTEM-W-NOSUCHDEV, no such device available
 +
17-AUG-2014 16:28:59.03 Einde UCX. Begin ELMS.
 +
 
 +
%RUN-S-PROC_ID, identification of created process is 00000093
 +
 
 +
17-AUG-2014 16:29:00.97 Einde ELMS. Begin VAXsimPLUS
 +
 
 +
 
 +
17-AUG-2014 16:29:01.07 Begin SDD$STARTUP(VAXsimPLUS)
 +
 
 +
%NCP-W-UNRCMP, Unrecognized component , Object
 +
 
 +
 
 +
%NCP-W-UNRCMP, Unrecognized component , Object
 +
 
 +
 
 +
%RUN-S-PROC_ID, identification of created process is 00000094
 +
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:29:09.26  %%%%%%%%%%%
 +
Message from user SYSTEM on UTCIV1
 +
VAXsimPLUS V1.6-204 startup - Using SDD$:[000000]VAXSIM$CLUSTER.DAT;1
 +
 
 +
Output will be written to CLUE$OUTPUT:UTCIV1_CRASH.TXT
 +
Output will be written to CLUE$OUTPUT:UTCIV1_CRASH.LIS
 +
  CLUE$PREV_CRASH = "OPERATOR"
 +
 
 +
17-AUG-2014 16:29:24.50 Einde SDD$STARTUP
 +
 
 +
 
 +
17-AUG-2014 16:29:24.58 Begin SPEAR-Basic(VAXsimPLUS)
 +
 
 +
LET OP LET OP er moet ingetikt worden wat de reden van de SHUTDOWN was
 +
Kijk in de lijst, die hierna volgt en tik een van de mogelijkheden in
 +
 
 +
Please give the reason for shutdown:
 +
 +
NEW, Installed new operating system
 +
SCHED, Scheduled system downtime
 +
SA, Stand Alone
 +
OPR, Operator error caused shutdown
 +
POWER, Environmental problems such as power or A/C
 +
SOFT, Privileged software development problems
 +
BUG, System Bugcheck
 +
HALT, System Halted
 +
HUNG, System Hung
 +
PM, Preventive Maintenance
 +
CM, Corrective Maintenance
 +
HDWR, Hardware Problem
 +
OTHER, Reloaded for other or unknown reasons
 +
 
 +
%RMS-W-TMO, timeout period expired
 +
No response seen. Cause will be written as Time out.
 +
%DCL-I-SUPERSEDE, previous value of VAXSIM$ALIAS has been superseded
 +
 
 +
17-AUG-2014 16:29:55.26 Einde SPEAR-Basic
 +
 
 +
17-AUG-2014 16:29:55.32 Einde VAXsimPLUS. Begin QUEUE setup.
 +
 
 +
17-AUG-2014 16:29:55.41 Begin POST.
 +
 
 +
POST QUEUE GEINITIALISEERD
 +
17-AUG-2014 16:29:56.21 Einde POST. Begin LPOCE.
 +
 
 +
 
 +
        LPOCE QUEUE GEINITIALISEERD
 +
 
 +
17-AUG-2014 16:29:58.58 Einde LPOCE. Begin RESTORE.
 +
 
 +
 
 +
RESTORE QUEUE GEINITIALISEERD
 +
 
 +
 
 +
17-AUG-2014 16:29:59.29 Einde RESTORE. Begin CIV1_SPECIAL.
 +
 
 +
%SET-E-NOTSET, error modifying LTA12:
 +
-CLI-E-DEVNOTSPL, device not spooled
 +
17-AUG-2014 16:30:00.64 Einde CIV1_SPECIAL. Begin CIV1_CT.
 +
 
 +
%SET-E-NOTSET, error modifying LTA13
 +
-CLI-E-DEVNOTSPL, device not spooled
 +
 +
                TIK IN: START/QUEUE CIV1_CT
 +
 +
17-AUG-2014 16:30:07.76 Einde CIV1_CT. Einde QUEUE SETUP.
 +
 
 +
 
 +
17-AUG-2014 16:30:07.86 Begin purge operator logfile's.
 +
 
 +
 
 +
Directory SYS$SYSROOT:[SYSMGR]
 +
 
 +
OPERATOR.LOG;1183    17-AUG-2014 16:24:24.39
 +
OPERATOR.LOG;1182    15-AUG-2014 22:49:43.06
 +
OPERATOR.LOG;1181    3-OCT-1998 00:31:37.33
 +
 
 +
Total of 3 files.
 +
 
 +
17-AUG-2014 16:30:09.24 Einde purge operator logfile.
 +
 
 +
 
 +
 
 +
 
 +
                Is er een CRASH geweest?
 +
                Type binnen 2 minuten J indien JA of N indien NEEN.
 +
 
 +
                17-AUG-2014 16:30:09.51
 +
 
 +
                (J/N): n
 +
 
 +
 
 +
17-AUG-2014 16:30:13.74 Einde CRASH. Begin mount user disks.
 +
 
 +
%MOUNT-F-NOSUCHDEV, no such device available
 +
%MOUNT-F-NOSUCHDEV, no such device available
 +
17-AUG-2014 16:30:15.60 Einde mount user disks. Begin ACOOUNTING(2).
 +
 
 +
 
 +
Defining Quantum RS logical names
 +
Quantum RS logical names have been defined
 +
 
 +
Quantum RS startup procedure
 +
 
 +
Defining Quantum RS logical names
 +
Quantum RS logical names have been defined
 +
 
 +
Installing Quantum RS user status program
 +
Quantum RS user status program is installed
 +
 
 +
Starting Quantum RS detached process
 +
Quantum RS detached process has been started
 +
 
 +
Setting protection on QRS_PROCEDURES:QRS_LOGIN.COM
 +
 
 +
Quantum RS startup procedure has successfully completed
 +
Quantum RS startup procedure is ending
 +
 
 +
Installing Quantum RS user status program
 +
Quantum RS user status program is installed
 +
 
 +
17-AUG-2014 16:30:34.63 Einde ACOOUNTING(2). Begin installatie IRIS(Inventarisadministratie
 +
17-AUG-2014 16:30:34.75 Einde installatie IRIS. Begin installatie ADIOS (NAWUT).
 +
 
 +
17-AUG-2014 16:30:34.86 Einde installatie ADIOS
 +
 
 +
17-AUG-2014 16:30:34.96 BEGIN SPSSX.
 +
 
 +
17-AUG-2014 16:30:40.24 Einde SPSSX. Begin MODULA.
 +
 
 +
17-AUG-2014 16:30:40.32 Einde MODULA. Begin Auditing.
 +
Security alarm failure mode is set to:
 +
    CRASH      Alarm failure will crash system
 +
 
 +
Security alarms currently enabled for:
 +
    ACL
 +
    AUTHORIZATION
 +
    BREAKIN:    (DIALUP,LOCAL,REMOTE,NETWORK,DETACHED)
 +
    LOGFAILURE: (BATCH,DIALUP,LOCAL,REMOTE,NETWORK,SUBPROCESS,DETACHED)
 +
17-AUG-2014 16:30:41.77 Einde copy dump. Begin install secondary PAGEFILE.
 +
 
 +
17-AUG-2014 16:30:41.88 Einde install secondary PAGEFILE. Begin BEMAND.
 +
 
 +
                BEMAND alleen draaien als er geen problemen zijn.
 +
                Ook NIET als het systeem meer dan enkele uren DOWN
 +
                is geweest. In dat geval BEMAND draaien nadat OPERATOR
 +
                ingelogd is en de batchjobs 08U00, 16U15, 16U45, 17U55
 +
                en ONBEMAND uit de queue verwijderd zijn.
 +
 
 +
                Moet de BEMAND gedraaid worden?
 +
                Type binnen 2 minuten J indien JA of N indien NEEN.
 +
 
 +
                17-AUG-2014 16:30:42.57
 +
 
 +
                (J/N): n
 +
 
 +
                17-AUG-2014 16:30:59.57
 +
 
 +
17-AUG-2014 16:30:59.65        "n" ingetikt, dus BEMAND wordt niet gedraaid.
 +
 
 +
 
 +
17-AUG-2014 16:31:00.77 Einde BEMAND. Begin BATCH QUEUE BATCH.
 +
 
 +
Reply received on UTCIV1 from user SYSTEM at UTCIV1 Batch  16:31:00
 +
        ***** %Enabled NIGHT parameters for SYS$BATCH queue. *****
 +
 
 +
 
 +
17-AUG-2014 16:31:01.06 Einde BATCH QUEUE BATCH. Begin ALTBATCH.
 +
 
 +
Batch queue SYS$BATCH, on UTCIV1::
 +
    /BASE_PRIORITY=4 /CPUDEFAULT=INFINITE /CPUMAXIMUM=INFINITE /JOB_LIMIT=2 /OWNER=[SYSTEM] /PROTECTION=(S:E,O:D,G:R,W:W)
 +
    /WSDEFAULT=256 /WSEXTENT=10240 /WSQUOTA=2048
 +
Batch queue SYSCIV1, stopped, on UTCIV1::
 +
    /BASE_PRIORITY=4 /CPUDEFAULT=INFINITE /CPUMAXIMUM=INFINITE /JOB_LIMIT=5 /OWNER=[SYSTEM] /PROTECTION=(S:E,O:D,G:R,W)
 +
    /WSDEFAULT=300 /WSEXTENT=700 /WSQUOTA=500
 +
                De BATCH alleen starten als er geen problemen zijn.
 +
                Ook NIET als het systeem meer dan enkele uren DOWN
 +
                is geweest. In dat geval de BATCH starten nadat OPERATOR
 +
                ingelogd is en de batchjobs 08U00, 16U15, 16U45, 17U55
 +
                en ONBEMAND uit de queue verwijderd zijn.
 +
 
 +
                Moet de BATCH gestart worden?
 +
                Type binnen 2 minuten J indien JA of N indien NEEN.
 +
 
 +
                17-AUG-2014 16:31:03.41
 +
 
 +
                (J/N): n
 +
 
 +
                17-AUG-2014 16:31:16.04
 +
 
 +
17-AUG-2014 16:31:16.11        "n" ingetikt, dus de BATCH wordt niet gestart.
 +
 
 +
 
 +
 
 +
17-AUG-2014 16:31:16.26 Begin TSO monitor.
 +
 
 +
 
 +
17-AUG-2014 16:31:16.34 Einde aktiverenTSO monitor.
 +
 
 +
 
 +
17-AUG-2014 16:31:16.43 Begin AUDIT monitor.
 +
 
 +
 
 +
17-AUG-2014 16:31:16.85 Einde aktiveren AUDIT monitor.
 +
 
 +
17-AUG-2014 16:31:16.93 Begin NETWORK_FILES controle (submit batch).
 +
 
 +
 
 +
17-AUG-2014 16:31:17.04 Einde submit controle NETWORK_FILES procedure.
 +
 
 +
 
 +
Reply received on UTCIV1 from user SYSTEM at UTCIV1 Batch  16:31:17
 +
              VAX4000-200 (== UTCIV1 ==) is up and running!
 +
 
 +
17-AUG-2014 16:31:17.32            System initialization completed.
 +
%SET-I-INTSET, login interactive limit = 100, current interactive value = 0
 +
  17-AUG-2014 16:31:20
 +
%DECW-W-NODEVICE, No graphics device found on this system
 +
-DECW-I-NODECW, DECwindows graphics drivers will not be loaded
 +
%RUN-S-PROC_ID, identification of created process is 00000097
 +
  SYSTEM      job terminated at 17-AUG-2014 16:31:56.41
 +
 
 +
  Accounting information:
 +
  Buffered I/O count:            5867        Peak working set size:    1231
 +
  Direct I/O count:              5246        Peak page file size:      5035
 +
  Page faults:                  45924        Mounted volumes:            0
 +
  Charged CPU time:          0 00:03:38.47  Elapsed time:    0 00:08:23.76
 +
 
 +
</pre>

Huidige versie van 12 aug 2016 om 01:27

Server: Digital MicroVAX 4000/200
Rubriek Opslag
Fabrikant Digital
Digital logo.png
Model 6400R-F3
Naam Digital MicroVAX 4000/200
Type Server
Serial# AY01400450
Systeem
Architectuur VAX
Systeembus/interface QBus
OS VMS 5.4-3
Netwerk
Hostname UTCIV1
IP Address
DECnet Address
MAC Address 08-00-2B-17-25-4B
Collectiegegevens
Eigenaar Museum
Status Werkt
Knowhow
Locatie Depot
Label
Herkomst DND
Datum opname collectie 9 aug 2014
Bestand:Hardware Digital MicroVAX 4000-200 picture.jpg
350px
Bekijk alle hardware - Ga naar het Museum - Nieuw item

CPU KA640-A

MEM 52MB

DISK RF72

TAPE TK70 


KA640-A V5.3, VMB 2.7
Performing normal system tests.
41..40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..
25..24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..
09..08..07..06..05..04..03..
Tests completed.
>>>sho mem
Memory 0: 00000000 to 003FFFFF, 4MB, 0 bad pages
Memory 1: 00400000 to 013FFFFF, 16MB, 0 bad pages
Memory 2: 01400000 to 023FFFFF, 16MB, 0 bad pages
Memory 3: 02400000 to 033FFFFF, 16MB, 0 bad pages

Total of 52MB, 0 bad pages, 122 reserved pages
>>>sho dev
DSSI Node 0 (DISK0)
-DIA0 (RF72)

DSSI Node 7 (*)

UQSSP Tape Controller 0 (774500)
-MUA0 (TK70)

Ethernet Adapter
-ESA0 (08-00-2B-17-25-4B)
>>>sho ver
KA640-A V5.3, VMB 2.7
>>>b
No default boot device has been specified.

Available devices.
-DIA0 (RF72)
-MUA0 (TK70)
-ESA0 (08-00-2B-17-25-4B)

Device? [ESA0]: dia0

(BOOT/R5:0 DIA0)



  2..
-DISK0$DIA0
  1..0..


   VAX/VMS Version V5.4-2   Major version id = 1 Minor version id = 0

PLEASE ENTER DATE AND TIME (DD-MMM-YYYY  HH:MM)  
PLEASE ENTER DATE AND TIME (DD-MMM-YYYY  HH:MM)  17-AUG-2014 16:23
$!  Copyright (c) 1990 Digital Equipment Corporation.  All rights reserved.

%STDRV-I-STARTUP, VMS startup begun at 17-AUG-2014 16:23:34.44
%SET-I-NEWAUDSRV, identification of new audit server process is 00000089
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:24:23.94  %%%%%%%%%%%
Operator _UTCIV1$OPA0: has been enabled, username SYSTEM

%%%%%%%%%%%  OPCOM  17-AUG-2014 16:24:24.00  %%%%%%%%%%%
Operator status for operator _UTCIV1$OPA0:
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, NETWORK, CLUSTER, LICENSE

%%%%%%%%%%%  OPCOM  17-AUG-2014 16:24:25.13  %%%%%%%%%%%
Logfile has been initialized by operator _UTCIV1$OPA0:
Logfile is UTCIV1::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1183

%%%%%%%%%%%  OPCOM  17-AUG-2014 16:24:25.14  %%%%%%%%%%%
Operator status for operator UTCIV1::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;1183
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, NETWORK, CLUSTER, LICENSE

17-AUG-2014 16:24:27.11 Einde logical names. Begin QUEUE MANAGER.

17-AUG-2014 16:24:34.74 Einde QUEUE MANAGER.

17-AUG-2014 16:24:34.82 Einde ....... Begin CDD/Plus.

Rdb/VMS monitor (RDMS_MONITOR) started

17-AUG-2014 16:24:46.36 Einde CDD/Plus. Start PASCAL.

17-AUG-2014 16:24:48.90 Einde PASCAL. Begin FORTRAN

17-AUG-2014 16:24:49.54 Einde FORTRAN. Begin FMS


17-AUG-2014 16:24:49.63 Einde FMS. Begin DTR


17-AUG-2014 16:24:49.88 Einde FMS.
17-AUG-2014 16:24:49.94 Begin DTR.

17-AUG-2014 16:24:52.32 Einde DTR. Begin COBOL.


17-AUG-2014 16:24:53.02 Einde COBOL. Begin ACCOUNTING(1)



17-AUG-2014 16:24:54.36 Einde ACCOUNTING(1). Begin PLTSMB + SMBSRVSHR.
17-AUG-2014 16:24:55.10 Begin CIVNETWERK.COM
17-AUG-2014 16:26:37.58 Einde CIVNETWERK.COM, begin STARTNET.COM
%RUN-S-PROC_ID, identification of created process is 0000008D
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:26:41.51  %%%%%%%%%%%
Message from user DECNET on UTCIV1
DECnet starting

%%%%%%%%%%%  OPCOM  17-AUG-2014 16:26:43.16  %%%%%%%%%%%
Message from user DECNET on UTCIV1
Error opening permanent proxy database

%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSEXE>NETTRACE.EXE
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSMSG>NETTRACE_MESSAGES.EXE
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSLIB>NETTRACE$GAP_ANALYZE.EXE
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSLIB>NETTRACE$GTW_ANALYZE.EXE
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSLIB>NETTRACE$L2E_ANALYZE.EXE
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSLIB>NETTRACE$L2_ANALYZE.EXE
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSLIB>NETTRACE$L3_ANALYZE.EXE
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSLIB>NETTRACE$L3_DDX76_ANALYZ
E.EXE
%INSTALL-W-NOPREV, no previous entry exists - new entry created for DISK$VAXVMSRL054:<SYS0.SYSCOMMON.SYSLIB>NETTRACE$X29_ANALYZE.EXE
%LES-S-PROC_ID, identification of created process is 0000008E
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:26:57.65  %%%%%%%%%%%
Message from user SYSTEM on UTCIV1
%LES-S-LESSTARTED, LES V2.0 loaded

%%%%%%%%%%%  OPCOM  17-AUG-2014 16:26:57.66  %%%%%%%%%%%
Message from user SYSTEM on UTCIV1
%LES-S-ACPSTARTED, LES$ACP started running LES$ACP V1.0

%%%%%%%%%%%  OPCOM  17-AUG-2014 16:27:02.49  %%%%%%%%%%%
Message from user SYSTEM on UTCIV1
%PSI-S-STARTED, VAX PSI V4.3 (Multi-host, Native), network device _NWA0: mounted

%PSI-S-STARTED, VAX PSI V4.3 (Multi-host, Native), network device _NWA0: mounted
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:27:06.23  %%%%%%%%%%%
Message from user SYSTEM on UTCIV1
%PSI-S-STARTED, VAX PSI V4.3, network device _NVA0: mounted

%NCP-I-NOINFO, No information in database
%NCP-W-UNRCMP, Unrecognized component , Line
Line = ISA-0
%SYSTEM-W-NOSUCHDEV, no such device available
%NCP-W-UNRCMP, Unrecognized component , Line
Line = DSV-0-1
%SYSTEM-W-NOSUCHDEV, no such device available
%NCP-W-OPEFAI, Operation failure , data check

%SYSTEM-F-FILNOTACC, file not accessed on channel
%NCP-I-NOINFO, No information in database
%PSIAUTH-I-RDBNOMODS, no modifications made to rights data base
%NCP-W-UNRCMP, Unrecognized component , Circuit
Circuit = ISA-0

%NCP-I-NOINFO, No information in database
%RUN-S-PROC_ID, identification of created process is 0000008F
17-AUG-2014 16:27:27.24 Einde STARTNET.COM, begin DSVCONFIG
%NCP-W-UNRCMP, Unrecognized component , Circuit


17-AUG-2014 16:28:25.99 Einde DSVCONFIG, begin LATPARM.COM
17-AUG-2014 16:28:28.87 Einde LATPARM.COM, begin DEF_DTE_TABLE
17-AUG-2014 16:28:30.03 Einde DEF_DTE_TABLE.COM, Einde RCNETWERK.COM
17-AUG-2014 16:28:30.18 Einde DECnet, EARN, 

%RUN-S-PROC_ID, identification of created process is 00000091
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:28:32.86  %%%%%%%%%%%
Message from user LATACP on UTCIV1
LAT ACP initialized                                                                                                                 


        Begin LAT$SYSTARTUP.COM


        Einde LAT$SYSTARTUP.COM

17-AUG-2014 16:28:44.04 Einde LAT


17-AUG-2014 16:28:44.11 Einde TERMINAL netwerk. Begin UCX

%RUN-S-PROC_ID, identification of created process is 00000092
The Internet driver and ACP were successfully loaded.
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:28:52.30  %%%%%%%%%%%
Message from user INTERnet on UTCIV1
INTERnet Loaded

%%%%%%%%%%%  OPCOM  17-AUG-2014 16:28:56.43  %%%%%%%%%%%
Message from user INTERnet on UTCIV1
INTERnet Started

%UCX-E-INVINTER, Error defining interface: ze0
-UCX-I-ACPQIO, Failure on Internet ACP QIO
-UCX-E-INVETHERNAM, Too many protocols or protocol already assigned
-SYSTEM-W-NOSUCHDEV, no such device available
17-AUG-2014 16:28:59.03 Einde UCX. Begin ELMS.

%RUN-S-PROC_ID, identification of created process is 00000093

17-AUG-2014 16:29:00.97 Einde ELMS. Begin VAXsimPLUS


17-AUG-2014 16:29:01.07 Begin SDD$STARTUP(VAXsimPLUS)

%NCP-W-UNRCMP, Unrecognized component , Object


%NCP-W-UNRCMP, Unrecognized component , Object


%RUN-S-PROC_ID, identification of created process is 00000094
%%%%%%%%%%%  OPCOM  17-AUG-2014 16:29:09.26  %%%%%%%%%%%
Message from user SYSTEM on UTCIV1
VAXsimPLUS V1.6-204 startup - Using SDD$:[000000]VAXSIM$CLUSTER.DAT;1

Output will be written to CLUE$OUTPUT:UTCIV1_CRASH.TXT
Output will be written to CLUE$OUTPUT:UTCIV1_CRASH.LIS
  CLUE$PREV_CRASH = "OPERATOR"

17-AUG-2014 16:29:24.50 Einde SDD$STARTUP


17-AUG-2014 16:29:24.58 Begin SPEAR-Basic(VAXsimPLUS)

LET OP LET OP er moet ingetikt worden wat de reden van de SHUTDOWN was
Kijk in de lijst, die hierna volgt en tik een van de mogelijkheden in

Please give the reason for shutdown:
 
NEW, Installed new operating system
SCHED, Scheduled system downtime
SA, Stand Alone
OPR, Operator error caused shutdown
POWER, Environmental problems such as power or A/C
SOFT, Privileged software development problems
BUG, System Bugcheck
HALT, System Halted
HUNG, System Hung
PM, Preventive Maintenance
CM, Corrective Maintenance
HDWR, Hardware Problem
OTHER, Reloaded for other or unknown reasons

%RMS-W-TMO, timeout period expired
No response seen. Cause will be written as Time out.
%DCL-I-SUPERSEDE, previous value of VAXSIM$ALIAS has been superseded

17-AUG-2014 16:29:55.26 Einde SPEAR-Basic

17-AUG-2014 16:29:55.32 Einde VAXsimPLUS. Begin QUEUE setup.

17-AUG-2014 16:29:55.41 Begin POST.

POST QUEUE GEINITIALISEERD
17-AUG-2014 16:29:56.21 Einde POST. Begin LPOCE.


        LPOCE QUEUE GEINITIALISEERD

17-AUG-2014 16:29:58.58 Einde LPOCE. Begin RESTORE.


RESTORE QUEUE GEINITIALISEERD


17-AUG-2014 16:29:59.29 Einde RESTORE. Begin CIV1_SPECIAL.

%SET-E-NOTSET, error modifying LTA12:
-CLI-E-DEVNOTSPL, device not spooled
17-AUG-2014 16:30:00.64 Einde CIV1_SPECIAL. Begin CIV1_CT.

%SET-E-NOTSET, error modifying LTA13
-CLI-E-DEVNOTSPL, device not spooled
 
                TIK IN: START/QUEUE CIV1_CT
 
17-AUG-2014 16:30:07.76 Einde CIV1_CT. Einde QUEUE SETUP.


17-AUG-2014 16:30:07.86 Begin purge operator logfile's.


Directory SYS$SYSROOT:[SYSMGR]

OPERATOR.LOG;1183    17-AUG-2014 16:24:24.39
OPERATOR.LOG;1182    15-AUG-2014 22:49:43.06
OPERATOR.LOG;1181     3-OCT-1998 00:31:37.33

Total of 3 files.

17-AUG-2014 16:30:09.24 Einde purge operator logfile.




                Is er een CRASH geweest?
                Type binnen 2 minuten J indien JA of N indien NEEN.

                17-AUG-2014 16:30:09.51

                (J/N): n


17-AUG-2014 16:30:13.74 Einde CRASH. Begin mount user disks.

%MOUNT-F-NOSUCHDEV, no such device available
%MOUNT-F-NOSUCHDEV, no such device available
17-AUG-2014 16:30:15.60 Einde mount user disks. Begin ACOOUNTING(2).


Defining Quantum RS logical names
Quantum RS logical names have been defined

Quantum RS startup procedure

Defining Quantum RS logical names
Quantum RS logical names have been defined

Installing Quantum RS user status program
Quantum RS user status program is installed

Starting Quantum RS detached process
Quantum RS detached process has been started

Setting protection on QRS_PROCEDURES:QRS_LOGIN.COM

Quantum RS startup procedure has successfully completed
Quantum RS startup procedure is ending

Installing Quantum RS user status program
Quantum RS user status program is installed

17-AUG-2014 16:30:34.63 Einde ACOOUNTING(2). Begin installatie IRIS(Inventarisadministratie
17-AUG-2014 16:30:34.75 Einde installatie IRIS. Begin installatie ADIOS (NAWUT).

17-AUG-2014 16:30:34.86 Einde installatie ADIOS

17-AUG-2014 16:30:34.96 BEGIN SPSSX.

17-AUG-2014 16:30:40.24 Einde SPSSX. Begin MODULA.

17-AUG-2014 16:30:40.32 Einde MODULA. Begin Auditing.
Security alarm failure mode is set to:
    CRASH       Alarm failure will crash system

Security alarms currently enabled for:
    ACL
    AUTHORIZATION
    BREAKIN:    (DIALUP,LOCAL,REMOTE,NETWORK,DETACHED)
    LOGFAILURE: (BATCH,DIALUP,LOCAL,REMOTE,NETWORK,SUBPROCESS,DETACHED)
17-AUG-2014 16:30:41.77 Einde copy dump. Begin install secondary PAGEFILE.

17-AUG-2014 16:30:41.88 Einde install secondary PAGEFILE. Begin BEMAND.

                BEMAND alleen draaien als er geen problemen zijn.
                Ook NIET als het systeem meer dan enkele uren DOWN
                is geweest. In dat geval BEMAND draaien nadat OPERATOR
                ingelogd is en de batchjobs 08U00, 16U15, 16U45, 17U55
                en ONBEMAND uit de queue verwijderd zijn.

                Moet de BEMAND gedraaid worden?
                Type binnen 2 minuten J indien JA of N indien NEEN.

                17-AUG-2014 16:30:42.57

                (J/N): n

                17-AUG-2014 16:30:59.57

17-AUG-2014 16:30:59.65         "n" ingetikt, dus BEMAND wordt niet gedraaid.


17-AUG-2014 16:31:00.77 Einde BEMAND. Begin BATCH QUEUE BATCH.

Reply received on UTCIV1 from user SYSTEM at UTCIV1 Batch   16:31:00
        ***** %Enabled NIGHT parameters for SYS$BATCH queue. *****


17-AUG-2014 16:31:01.06 Einde BATCH QUEUE BATCH. Begin ALTBATCH.

Batch queue SYS$BATCH, on UTCIV1::
    /BASE_PRIORITY=4 /CPUDEFAULT=INFINITE /CPUMAXIMUM=INFINITE /JOB_LIMIT=2 /OWNER=[SYSTEM] /PROTECTION=(S:E,O:D,G:R,W:W) 
    /WSDEFAULT=256 /WSEXTENT=10240 /WSQUOTA=2048
Batch queue SYSCIV1, stopped, on UTCIV1::
    /BASE_PRIORITY=4 /CPUDEFAULT=INFINITE /CPUMAXIMUM=INFINITE /JOB_LIMIT=5 /OWNER=[SYSTEM] /PROTECTION=(S:E,O:D,G:R,W) 
    /WSDEFAULT=300 /WSEXTENT=700 /WSQUOTA=500
                De BATCH alleen starten als er geen problemen zijn.
                Ook NIET als het systeem meer dan enkele uren DOWN
                is geweest. In dat geval de BATCH starten nadat OPERATOR
                ingelogd is en de batchjobs 08U00, 16U15, 16U45, 17U55
                en ONBEMAND uit de queue verwijderd zijn.

                Moet de BATCH gestart worden?
                Type binnen 2 minuten J indien JA of N indien NEEN.

                17-AUG-2014 16:31:03.41

                (J/N): n

                17-AUG-2014 16:31:16.04

17-AUG-2014 16:31:16.11         "n" ingetikt, dus de BATCH wordt niet gestart.



17-AUG-2014 16:31:16.26 Begin TSO monitor.


17-AUG-2014 16:31:16.34 Einde aktiverenTSO monitor.


17-AUG-2014 16:31:16.43 Begin AUDIT monitor.


17-AUG-2014 16:31:16.85 Einde aktiveren AUDIT monitor.

17-AUG-2014 16:31:16.93 Begin NETWORK_FILES controle (submit batch).


17-AUG-2014 16:31:17.04 Einde submit controle NETWORK_FILES procedure.


Reply received on UTCIV1 from user SYSTEM at UTCIV1 Batch   16:31:17
              VAX4000-200 (== UTCIV1 ==) is up and running!

17-AUG-2014 16:31:17.32            System initialization completed.
%SET-I-INTSET, login interactive limit = 100, current interactive value = 0
  17-AUG-2014 16:31:20
%DECW-W-NODEVICE, No graphics device found on this system
-DECW-I-NODECW, DECwindows graphics drivers will not be loaded
%RUN-S-PROC_ID, identification of created process is 00000097
  SYSTEM       job terminated at 17-AUG-2014 16:31:56.41

  Accounting information:
  Buffered I/O count:            5867         Peak working set size:    1231
  Direct I/O count:              5246         Peak page file size:      5035
  Page faults:                  45924         Mounted volumes:             0
  Charged CPU time:           0 00:03:38.47   Elapsed time:     0 00:08:23.76
Overgenomen van "https://hack42.nl/mediawiki/index.php?title=Digital_MicroVAX_4000-200&oldid=23297"